Results 71 - 80 of 91

• The Introduction of Roof Bolting to U.S. Underground Coal Mines (1948-1960): A Cautionary Tale
  8/1/2002 - Conference papers
  The story of how roof bolting was implemented by the mining industry, but took so long to live up to its promise, is a fascinating example of the interaction between economics, technology, regulation, and science. It still has important lessons for today.
• Sizing of Final Stumps for Safer Pillar Extraction
  8/1/2001 - Conference papers
  The risk of major pillar falls can often be reduced by leaving final stumps, large enough to protect the intersection but small enough to not inhibit gob caving. Analyses were conducted to assess factors on the size variation of remnant stumps.
• Failure Characteristics of Roof Falls at an Underground Stone Mine in Southwestern Pennsylvania
  8/1/2001 - Conference papers
  The location and time of 2,007 microseismic emissions from a limestone mine were compared with mine face development and mine layout characteristics. The occurrence of roof failure zones appears to be associated with mine plan characteristics.
• Updating the NIOSH Support Technology Optimization Program (STOP) With New Support Technologies and Additional Design Features
  8/1/2001 - Conference papers
  The Support Technology Optimization Program (STOP) was updated to Version 2.3. This paper describes the additional features: including uncontrolled convergence into the design requirements for standing roof supports; the addition of design procedures fo...
• Field Evaluation of Mobile Roof Support Technologies
  8/1/2001 - Conference papers
  A historic overview of the role of mobile roof support (MRS) technologies in improving stability and worker safety is presented along with field evaluations of the MRS load rate monitoring device and other remote deformation-monitoring techniques.
• Case Studies of Cable Bolts Using Instrumented King Wires
  7/1/2001 - Conference papers
  Instrumented cable bolts were used in conjunction with existing ground control to monitor rock mass loads at various field sites. By monitoring rock mass load and displacement, more effective ground support can be selected and installed.
• Design of Primary Roof Support Systems in U.S. Coal Mines Based on the Analysis of Roof Fall Rates
  6/1/2001 - Conference papers
  A study is described where information was collected at 37 coal mines on roof falls and other geotechnical, mining, geologic, and roof bolting factors. A statistical analysis was conducted on the data with roof fall rate as the outcome variable.
• A Study of the Ground Control Effects of Mining Longwall Faces Into Open or Backfilled Entries
  1/1/2001 - Peer reviewed journal articles
  This paper summarizes case studies where unusual circumstances required that a longwall retreat into or through previously driven rooms. Two types of roof failure are identified and discussed.
• Best Practices to Mitigate Injuries and Fatalities from Rock Falls
  8/1/2000 - Conference papers, Safety guidelines, tips, and checklists
  This paper presents an overview of the most significant ground control hazards facing today's mineworkers, as well as best practices to reduce these risks.
• Technology News 482 - Ground Support Safety Training Video
  7/1/2000 - Technology News
  This video, entitled "Ground Support...It's Important, or Miner Mike Saves the Day," presents information on why ground supports work and how to install them properly.